Boiler Installation for Royal Wootton Bassett Homes

No. At about 10 miles from my Highworth base it is towards the edge of my area, but it is one of the towns I cover. Lydiard Millicent and Purton sit in between, and both are in my area too.

It may be, but boilers fitted when a house is built are not always sized to how a household actually lives. The hot water flow you need, the incoming mains supply and the gas pipe size all help decide the output that suits the house.

The cylinder and loft tanks are no longer needed, which frees up space. The heating then runs as a sealed, pressurised system, so older pipes and radiator valves need to be in good enough shape to cope, which is worth checking first.

Flue terminals need set distances from windows, doors, corners and boundaries, and the plume of vapour should not blow somewhere it causes a nuisance. If the current spot no longer works, a plume kit or a different boiler position may be the answer.

Yes, ideally. Seeing the boiler, airing cupboard, radiators and loft access helps, and so does hearing how many people use hot water and when. That conversation shapes the recommendation as much as the measurements do.

A combi's hot water output depends on its size and on the incoming mains pressure and flow, which are worth measuring before deciding. If the supply is weak or the house has several bathrooms, a system boiler with a cylinder may serve you better.

Often they are. Many older radiators work well once the system is clean. The ones worth a closer look are those that stay cold at the bottom, leak at the valves or are too small for the room, so you can decide what to do about them.

Ask about it when you get in touch. Modern controls can usually be set to a simple routine, and for someone who finds timers confusing, being shown the few buttons they actually need makes a new system far less daunting.

Your postcode, the current boiler make and model with its rough age, the number of bathrooms and radiators, and photos of the boiler, the flue outside and any airing cupboard. With that, the first conversation can focus on the decisions rather than the basics.

Where the water runs clear and radiators heat evenly, it may not be needed. Where there is sludge, connecting a new boiler to dirty water can lead to blockages and wear, so if your radiators show signs of it, it is worth raising when you get in touch.