Gas Engineer Work in Blunsdon

Not always. Hob cut-out sizes vary between brands and models, and the gas connection can sit in a different place. Send me the old and new model numbers and I'll talk you through whether the worktop may need adjusting before the new hob arrives.

New houses often have pipe buried in floors or walls, so it can be traced from the meter and the appliance connections, with help from any build drawings you have. That helps avoid drilling into a pipe during a refit or when fitting units.

Pipes often run straight up or across from appliances and the meter, but not always. If you are unsure where the gas pipe is, don't drill. If you ever hit one and smell gas, leave the property and call the National Gas Emergency Service on 0800 111 999.

The chimney or flue has to suit the new fire, since different fires have different flue and ventilation needs. The old fire then comes out, the supply is adjusted to suit and the new one is fitted and tested. Send me the model you have in mind and I'll talk you through it.

It checks whether the gas installation in your home holds pressure without any measurable drop, which shows there are no leaks in the pipework and connections. Testing before gas work shows whether there is an existing problem, and testing afterwards confirms the new work is sound.

If you're selling or giving away a gas cooker, it should be disconnected and the supply capped properly rather than left open or simply turned off at the tap. The capped supply should then be tested, so the space is safe until something else goes in.

Yes. Haydon Wick and Stratton St Margaret are next door to Blunsdon, and Highworth itself is close by. All of them are within the 13 towns and villages I cover. Pop your postcode in the enquiry and I'll confirm.

Your postcode, whether the house is on an established street or a newer estate, what the appliance is and a photo of it with its connection. If you already have the new appliance, its model number helps me check it suits your supply.

Yes, please keep them. Manufacturer's instructions set the clearances, connection type, ventilation and flue requirements for that exact model, and the appliance should be fitted to them. Leave them out on the day, then keep them somewhere safe afterwards.

Often. If a new boiler is going in, it is a good moment to look at the rest of the gas installation too, such as a hob, a gas fire or pipework that needs resizing. Mention everything when you ask about the boiler and I'll talk through whether it can all be looked at together.