Boiler Installation for Coate Homes

Not always. If the existing cylinder is in good condition and suits the new boiler, it may be kept. If it is old or the wrong type, a different cylinder, or a combi instead, may make more sense. The choice is worth talking through.

Yes. Coate is about 7 miles from Highworth and part of my area, as are Old Town Swindon, Chiseldon and central Swindon nearby, covering both the older homes by the park and the newer outer streets.

An open vented system has a small tank in the loft that keeps it topped up and gives it room to expand. A sealed system has no loft tank and runs under pressure, with a vessel near the boiler. The type affects which boiler can be fitted.

Radiators cold at the bottom, dark water when bleeding them, a noisy boiler or pump, and heating that is slow to warm up are typical signs of sludge. If you notice these, cleaning the system before a new boiler goes on is something to ask about when you get in touch.

If the existing flue position no longer meets clearance distances, alternatives include a different wall, a vertical flue through the roof or a plume kit to redirect the vapour. Sometimes a slightly different boiler position solves it, so if you want the boiler elsewhere, mention it at the start.

If work is needed on the cylinder, clearing the cupboard gives room to work. If the cylinder is staying as it is, the cupboard may not need clearing at all, and it is worth asking when you get in touch.

A noisy old boiler, banging pipes or a gurgling system often point to sludge, air or a tired pump. A new boiler on a clean system can quieten things down, but if the noise is coming from somewhere else, a new boiler alone won't cure it.

It depends on the thermostat's age and type. Some older controls work with new boilers and others do not, so it is worth checking. If you would like help understanding new controls once they are in, just ask.

Yes. If parking is tight or restricted near your home, let me know when you get in touch. It helps with planning the visit and the installation, especially as a boiler and its parts need carrying in.

The heating and hot water should both come on as set, the radiators should warm through, and the pressure gauge should sit in its normal range. Knowing how to set the times and adjust the temperature helps too, so ask if anything is unclear.